Replace HD in A2? - Page 12

Drewmama · 11-05-2008, 17:14

Nice job BaTu... You planning on mass-producing your adapter any time soon?

gaspain · 01-16-2009, 19:55

I took the 40gb HDD from my dead Cowon M3, and dropped it in the A2. Had to flash the firmware afterwards. It works just fine, but sticks out a bit so I filled the gap with some 2-part silicone puddy that hardened to a nice stiff rubber, then trimmed the edge with a razor. Looks factory!

iran1357 · 01-18-2009, 04:23

hi my cowon doesnt turn on and it happened after falling down.after that i showed to repairman of a cowon company and he took just a sticker on the harddisk and work now i came to malaysia_kuala lumpur and it doesnt work suddenly what should i do?help me i really need my cowon a2

BaTu · 01-21-2009, 18:47

It sounds a lot like the hard drive slipped out of its connector. You may wanna make sure the hdd is secured tightly, that is if you're comfortable with opening your cowon.

Claymenia · 05-25-2009, 17:52

Hi everyone,

I read complety topic, and i've a question :

actually, where can i buy an HDD 60Gb 1.8" 5mm ? Other model are out and are a good compatibility (i find exclusivly 8mm or Zif) ?

Thx by advance, i search this HDD for my cowon A2.

stow · 12-09-2009, 10:36

Check ebay for replacement drives.

01-18-2009, 04:23	#168
iran1357 Junior Member Join Date: Jan 2009 Posts: 1	hi my cowon doesnt turn on and it happened after falling down.after that i showed to repairman of a cowon company and he took just a sticker on the harddisk and work now i came to malaysia_kuala lumpur and it doesnt work suddenly what should i do?help me i really need my cowon a2 Last edited by iran1357; 01-18-2009 at 04:27..

12-09-2009, 10:36	#171
stow Member Join Date: May 2007 Posts: 138	Check ebay for replacement drives. __________________ Sig removed, spam is not allowed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2008, 17:14	#166
Drewmama Junior Member Join Date: Jun 2006 Posts: 2	Nice job BaTu... You planning on mass-producing your adapter any time soon?

01-16-2009, 19:55	#167
gaspain Junior Member Join Date: Sep 2008 Posts: 3	I took the 40gb HDD from my dead Cowon M3, and dropped it in the A2. Had to flash the firmware afterwards. It works just fine, but sticks out a bit so I filled the gap with some 2-part silicone puddy that hardened to a nice stiff rubber, then trimmed the edge with a razor. Looks factory!

01-21-2009, 18:47	#169
BaTu Junior Member Join Date: Nov 2006 Posts: 8	It sounds a lot like the hard drive slipped out of its connector. You may wanna make sure the hdd is secured tightly, that is if you're comfortable with opening your cowon.

05-25-2009, 17:52	#170
Claymenia Junior Member Join Date: May 2009 Posts: 2	Hi everyone, I read complety topic, and i've a question : actually, where can i buy an HDD 60Gb 1.8" 5mm ? Other model are out and are a good compatibility (i find exclusivly 8mm or Zif) ? Thx by advance, i search this HDD for my cowon A2.