![]() |
![]() |
![]() |
![]() |
|
|
#1 |
|
Junior Member
Join Date: Jul 2009
Posts: 4
|
Hi to all.
I have been having a few problems with my D2. It is a DAB version with 1.11 D2+ firmware. It was working fine up until recently, when I was having problems charging it, and would have to plug it into my PC, then into the wall charger, to get any life into it. Today I took it apart, and tested the battery, which is showing 2.4V. Not good. I'm pretty sure it should not be able to go below 3V, and the tricks I was doing to get it to work were discharging the battery below its normal threshold. Basically, does anyone know if there is a way of recharging a LiPo from below 3V? I've tried plugging it into the wall charger overnight, but it doesn't seem to do anything. Thanks in advance for any useful advice. |
|
|
| Advertisement | [Remove Advertisement] |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Nov 2007
Location: Germany
Posts: 423
|
I have no idea if you can rescue the battery.
You have your D2 already taken apart, so why don't you just put there a new battery as described in this thread: http://iaudiophile.net/forums/showthread.php?t=27464
__________________
Cowon D2 legacy Black (4GB + 16GB Kingston) D2+ FW 3.13 - "Utopia Ultimate" theme + "dark stage" flash skin // RockBox with Breeze Theme Sennheiser CX 300 Link on how to determine battery life on the D2/D2+: click here |
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|